Phone
T: 01293 553888 

Bi-Folding Overhead Tracked Gate Folding gates for underground car parks and undercrofts CSG 10607 

Bi-Folding Overhead Tracked Gate Folding gates for underground car parks and undercrofts CSG 10607 

Bi-Folding Overhead Tracked Gate Folding gates for underground car parks and undercrofts CSG 10607 

Bi-folding Ovehead Tracked Gate Folding gates for underground car parks and undercrofts CSG 10607 

Bi-Folding Overhead Tracked Gate Folding gates for underground car parks and undercrofts CSG 10607 

Bi-folding Ovehead Tracked Gate Folding gates for underground car parks and undercrofts CSG 10607 

BI-FOLDING OVERHEAD TRACKED GATE CSG 10607 

NEW FOR MARCH 2020 
 
This new gate has been designed and manufactured by Cova Security Gates to meet the ongoing demand for securing underground car parks, specifically for when space directly behind the gate may be limited. 
 
Our latest CSG model 10607 has the unique feature in that the motor to power the gates are contained with the posts which operates via an overhead track system. Therefore there is no need for a separate housing assembly. 
 
It is the perfect solution to secure loading bays, multi-storey car parks and where there is limited or restricted access such as underground car parks or as an alternative to roller shutters. 
 
This gate can be designed to span an opening 5m wide and 2.4m high. 
 
The CSG 10607 Bi-Folding Overhead Gate consists of two drive posts, which house the motors, and onto each post a bi-folding leaf is attached by hinges. There is no requirement for a separate housing assembly. 
 
A low profile overhead track is self supported by the gate posts which negates the need for additional structural fixings and ground tracks.  
 
The bi-folding leaf utilises an overhead guide track so there is no requirement for ground guides or track. 
 
The gate is designed to open inwards, however if requested, an outward opening variation could be implemented depending on a site risk assessment. 
 
Gate leaf sections are fully welded assemblies, constructed of RHS steel section, although additional/alternative materials can be accommodated to suit - every gate we design and manufacture is bespoke to site conditions. 
 
The CSG 10607 Overhead Car Park Gate can be programmed to operate as a pair or with independent leaf control depending on on-site preferences. 
 
The drive/s are located within the posts and are controlled by a Programmable Logic Controller (PLC) located within the associated control cabinet. 
 
All gate systems come complete with a photocell and safety edges as standard. 
 
Model 10607 bi-fold gate is ideally suited for underground car parks, undercrofts, multi-storey car parks or where there is limited or restricted access. 
Can be designed up to 5 metres wide and 2.4 metres high 
Opening / closing speed 8-14 seconds – fully programmable for slower speeds. 
Electro-mechanical overhead track system. 
Can be surface fixed or can sub surface fixed. 
Continuously rated 100% high duty 
Infill can be custom designed to suit any architectural brief 
Standard finish – powder coated in a RAL colour to suit 
Programmable Logic Controller with any type of operating controls to suit 
Bi-folding gate leaves can be individually controlled providing entry and exit lane control 

Why a CSG 10607? 

CSG 10601 security gate benefits tick icon
Ideal for underground car parks, loading bays or as an alternative if roller shutters may be required. 
CSG 10601 security gate benefits tick icon
Electro-mechanical overhead track system 
CSG 10601 security gate benefits tick icon
Available in any ral colour to suit or can be galvanised. 
CSG 10601 security gate benefits tick icon
Available as a single leaf or bi-parting pair. 
CSG 10601 security gate benefits tick icon
Hand built in the UK 
CSG 10601 security gate benefits tick icon
Warranty, service and maintenance available. 
Subscribe me to your newsletter? 
Car park folding gate Car park gate installed Folding gate manufacture a CSG10601
Car park folding gate closed Car park gate view Folding gate closed with person walking nearby
Car park gate being manufactured Overhead tracked gate Closed large building gates
Check Icon

Construction 

Drive: 1 or 2 no 230v, 3-phrase, helical brake geared motor in a CFC closed loop configeration, thus providing force limitation. Operational useage, 100% duty cycle - capable of continuous usage. 
Hinges: 15mm dia stainless steel pins, glacier DY self-lubricating plain bearings and ball bearings. 
Gate structure is fully welded RHS section. 
Width of opening up to 5000mm 
Height of gate - up to 2400mm 
Check Icon

Controls 

Controls are Programmable Logic Controller (PLC) based and therefore are very flexible and can be configured to suit customer’s requirements. 
Optional features can include conventional push button station or key fobs. 
Single or multiple control positions and all forms of access control can be utilised. 
Check Icon

Finish 

Polyester powder coated to a specific RAL No. 
Shot blast to SA 2.5 
Zinc rich powder prime @ 60μm ±10% 
Check Icon

Features and Benefits 

Specifically designed for underground car parks, undercrofts and similar applications where the there is limited space inside the car park building. 
Available in widths up to 5000mm and heights up to 2400mm. 
Can be finished in any RAL colour, added mesh or cladding to blend in with building decor. 
Safecontractor
Chas Accredited
Safecontractor
Constructionline Silver Member
Gate Safe Installer
Gate Safe Installer
Made in Britain
Green Small Business Certified
PSSA Perimeter Security Suppliers Association
Safecontractor
Star Icon
'Very happy with Cova' 
Denis - Skanska JV 
Star Icon
'Cova's solution was the obvious choice' 
Gordon - Liberty Stadium, Swansea 
Star Icon
'A simple solution - highly recommended' 
David - Gatwick Airport 
Star icon
'Exceptional work carried out' 
Nick - High Commission, Islamabad 
CONTACT US 
Our site uses cookies. For more information, see our cookie policy. Accept cookies and close
Reject cookies Manage settings