Phone
T: 01293 553888 

Crash Rated Sliding Cantilevered Gate Sliding gate for wide entrances withstanding impacts of up to 40mph CSG 10140 

Crash Rated Sliding Cantilevered Gate Sliding gate for wide entrances withstanding impacts of up to 40mph  CSG 10140 

Crash Rated Sliding Cantilevered Gate Sliding gate for wide entrances withstanding impacts of up to 40mph CSG 10140 

Crash Rated Sliding Cantilevered Gate Sliding gate for wide entrances withstanding impacts of up to 40mph  CSG 10140 

Crash Tested Sliding Cantilevered Gate CSG 10140 

The CSG 10140 Crash Tested Sliding Cantilevered Gate is designed to provide a low cost crash tested sliding gate to prevent hostile vehicle mitigation / vehicle-borne terrorist or ram-raid threat. 
 
The gate successfully passed the PAS 68:2010 test and achieved the following 3 classifications: 
 
1) Sliding Gate - 3000mm wide x 2400mm high : V/7500[N2]/64/90:1.7/0.0. 
2) Sliding Gate - 5000mm wide x 2400mm high : V/7500[N2]/64/90:2.0/0.0. 
3) Sliding Gate - 8000mm wide x 2400mm high : V/7500[N2]/64/90:3.0/0.0. 
 
As per detailed above the three TRL Crash-Tests conducted is available in widths from 3000mm – 8000mm.  
 
Any bespoke gate required between these widths and heights will be a design assessment, derived form the orginal PAS68:2010 tests. 
 
Constructed from regular steel section, rather than large and unsightly heavy weight materials. This gate design can be aesthetically blended into the building or perimeter line, enabling hostile vehicle mitigation. 
 
The standard material reduces production costs, offering an effective crash tested solution at a comparatively low cost when evaluated against other available products. 
 
The CSG 10140 Sliding Cantilevered Gate requires a foundation depth of only 400mm, ideally suited to shallow and/or utility congested substructure. 
 
The product is able to accept most architectural enhancement over and above its standard construction; therefore it lends itself to the continuation of any high security fencing specification, powered fence, or security toppings across the normally vulnerable vehicular entrance to the site. 
 
This gate design can be aesthetically blended into the building or perimeter line, enabling hostile vehicle mitigation. The standard material reduces production costs, offering an effective crash tested solution at a comparatively low cost when evaluated against other available products. 
 
Crash Tested Sliding Gate 
 
Constructed from standard steel section, this automated gate can be considered a low cost option. 
Capable of blending seamlessly with any building or site perimeter line, enabling discreet vehicle mitigation for critical infrastructure and high security sites – supplied in a colour/finish to suit the client. 
The CSG 10140 requires a minimal installation depth of 400mm, making it ideally suited to shallow and/or utility-congested substructure. 
Effective gate width – now available up to a maximum of 8000mm following further testing of our patented arrestor system. 
Height of gate – minimum 1800mm to maximum 2400mm – greater heights possible on application. 
 
The product is able to accept any architectural enhancement over and above its standard construction format, lending itself to the continuation of any high security fencing specification, powered fence or security toppings across the normally vulnerable vehicular entrance/exit to site. A non-crash tested sliding cantilevered gate is also available. 
 
 
 
PLEASE NOTE TO COMPLY WITH CPNI GUIDELINES, THE PHOTOGRAPHS BELOW ARE IDENTIFIED AS 'RATED', OR NOT AS 'RATED'
 
Some of the images represent different widths and heights to the original TRL crash test conducted and may have additional cladding or mesh etc that wasn't present during the test. 
 
 

Why a CSG 10140? 

CSG 10140 crash tested gate benefits tick icon
Crash Rated to 40mph - nominal opening available up to 8000mm 
CSG 10140 crash tested gate benefits tick icon
Operates at low & high weather extremes. 
CSG 10140 crash tested gate benefits tick icon
Manual or automatic controls 
CSG 10140 crash tested gate benefits tick icon
Ideal for domestic property, gated communities, car parks and warehouses. 
CSG 10140 crash tested gate benefits tick icon
Hand built in the UK 
CSG 10140 crash tested gate benefits tick icon
Standard height of 1800mm to 3000mm, greater heights possible on application. 
CSG 10140 crash tested gate benefits tick icon
Warranty, service and maintenance available. 
CSG 10140 crash tested gate benefits tick icon
This gate successfully passed the PAS 68:2010 test and achieved the following classifications each at 2.4m high. 
1) Sliding Gate - 3000mm wide x 2400mm high : V/7500[N2]/64/90:1.7/0.0. 
2) Sliding Gate - 5000mm wide x 2400mm high : V/7500[N2]/64/90:2.0/0.0. 
3) Sliding Gate - 8000mm wide x 2400mm high : V/7500[N2]/64/90:3.0/0.0.  
Model CSG 10140 crash tested to 7,500kg 
(7.5 Tonne) @ 64km/h (40mph). 
3000mmm Wide : PAS 68: 2010 
Vehicle Test Weight: 
7500kg 
Vehicle Class: 
N2 
Vehicle Speed MPH: 
40 
Vehicle Speed KMH: 
64 
Vehicle Angle: 
90 
Vehicle Penetration: 
1.7 
Dispersion Distance: 
0.0 
5000mm Wide : PAS 68: 2010 (as per 3m Wide but) 
Vehicle Penetration: 
2.0 
8000mm Wide : PAS 68: 2010 (as per 3m Wide but) 
Vehicle Penetration: 
3.0 
Subscribe me to your newsletter? 
Pre crash test CSG 10140  - Product shown is as RATED - Tested at 5000mm w x 2400mm h CSG 10140 Post crash test - Product shown is as RATED tested at 5000mm h x 2400mm w CSG 10140 Post crash test - Product shown is as RATED tested at 5000mm h x 2400mm w
CSG 10140 - Product shown is as RATED, tested at 8000mm w x 2400mm h CSG 10140 installed - Product shown is not as RATED & gate includes additional mesh not affixed at the crash test. Image is during factory test at Cova Security Gates. CSG 10140 installed - Product shown is not as RATED & gate includes additional mesh not affixed at the crash test.
CSG 10140 installed - Product shown is not as RATED & gate includes additional mesh not affixed at the crash test. CSG 10140  - Product Shown in factory is manufactured, is as RATED - Tested at 8000mm w x 2400mm h CSG 10140 installed - Product shown is not as RATED.
Check Icon

Construction 

Gate structure is manufactured from mild steel sections and proprietary folded track. 
Infill - typically vertical bar, other options are available. 
Receptor and motor posts constructed from proprietary steel sections. 
Nominal opening - available up to a maximum of 8000mm. 
Standard height - 1800mm to 3000mm – greater heights possible on application. 
Check Icon

Controls 

Gate can be controlled manually or automatically by a variety of interfaces. 
Check Icon

Finish 

Leaf lengths up to 7.5m 
Polyester powder coated to a specific RAL No. Galvanised or galvanised and polyester powder coated to a specific RAL No. 
 
Leaf lengths exceeding 7.5m 
Painted finish to a specific RAL No. Galvanised or galvanised and painted to a specific RAL No finish. 
Other finishing options available. 
Check Icon

Features and Benefits 

Nominal opening – available up to a maximum of 8000mm. 
Two drive options available, dependent on site requirements. 
Infill typically vertical bar utilising 30mm RHS, a range of other options are available including palisade, bar configuration and mesh. 
Ideal for locations with large runback area. 
Minimal foundation depth of 280mm 
 
Star Icon
'Very happy with Cova' 
Denis - Skanska JV 
Star Icon
'Cova's solution was the obvious choice' 
Gordon - Liberty Stadium, Swansea 
Star Icon
'A simple solution - highly recommended' 
David - Gatwick Airport 
Star icon
'Exceptional work carried out' 
Nick - High Commission, Islamabad 
CONTACT US 
Our site uses cookies. For more information, see our cookie policy. Accept cookies and close
Reject cookies Manage settings