Static Bollard Series – CSG 10800
Cova Security Gates 10800 Series Bollards Crash Tested
The CSG 10840 (Crash Tested to 40mph) and CSG 10850 (Crash Tested to 50mph) have been designed specifically to protect critical national infrastructure from vehicle attack and vehicle borne improvised explosive devices.
This product is available in medium and shallow depth static bollards, which can be tailored to meet individual perimeter protection requirements as we have designed these with a unique articulated arm system that allows the bollards to be installed on gradients, curved arrays and 90 degree angles.
Our Static Bollards are ideal for locations that require cost effective, permanent and fixed protection against vehicle penetration, offering an unobtrusive and inoffensive solution.
Finishes include; stainless steel, galvanised, painted, or PU. The bollard sleeve can be moulded to suit any design requirement and environment.
Bollards were crash tested when installed and positioned in an array of 3.
Ideal for a permanent fixing where you would need to protect entrances and perimeters for retail sites, train stations, stadiums, financial service industries, commercial property and education sites such as universities, colleges and schools.
Why a CSG 10800?

Ideal for retail sites, train stations, stadiums, financial service industries, commercial property and education sites such as universities, colleges and schools

Static protection

Hand built in the UK

Operates at low & high weather extremes.

Warranty, service and maintenance available.
Model CSG 10840 crash tested to 7,500kg
(7.5 Tonne) @ 64km/h (40mph).
Vehicle Test Weight: |
7500kg |
Vehicle Class: |
N2 |
Vehicle Speed MPH: |
40 |
Vehicle Speed KMH: |
64 |
Vehicle Angle: |
90 |
Vehicle Penetration: |
0.0 |
Dispersion Distance: |
17.9 |
Model CSG 10850 crash tested to 7,500kg
(7.5 Tonne) @ 80km/h (50mph).
Vehicle Test Weight: |
7500kg |
Vehicle Class: |
N2 |
Vehicle Speed MPH: |
50 |
Vehicle Speed KMH: |
80 |
Vehicle Angle: |
90 |
Vehicle Penetration: |
2.8 |
Dispersion Distance: |
9.8 |







Construction
Core diameter 254mm.
Mild steel circular hollow section.
Nominal height topping 1050mm.
Foot of bollard is embedded in 210mm concrete foundation.
Unique articulated arm system allows the bollards to be installed on gradients, curved arrays and 90 degree angles achievable.
Each bollard can be individually levelled via four jacking screws.
Stainless steel sleeve diameter 279mm, other sizes available on request.
Left and right-hand end units fully tested to PAS 68:2010.

Controls
No controls : Static

Finish
Hot zinc spray, can be sleeved or painted to a specific RAL No.
A range of DDA banding is available on request.

Features and Benefits
Minimal foundation depth of 210mm.
CSG 10840 shallow depth bollard achieved ZERO penetration during the PAS 68:2010 crash test.
Unique articulated arm system allows the bollards to be installed on gradients, curved arrays and 90 degree angles achievable.
Each bollard can be individually levelled.