Surface fixed bi-folding gate Crash Rated folding gate requiring minimal groundwork CSG 10630
Surface fixed bi-folding gate Crash rated folding gate requiring minimal groundwork CSG 10630
Crash Rated ‘Surface Fixed’ Bi-Folding Gate CSG 10630
Cova Security Gates have worked with world leading HVM Security Specialists to design and deliver our first *Design assessment Crash Rated ‘Surface Fixed’ Bi-Folding Gate. This CSG 10630 model is able to withstand vehicle impact at 30mph (48kmh).
(*Design assessment, derived from the original CSG 10640 & CSG 10650 PAS68:2010 Impact Test)
This product has been engineered to suit your specific site requirements for preventing vehicle impact at 30mph (48km/h) by a car or light van Class N1 weighing 3500kg (7700lb).
Entirely different from our other crash rated bi-folding trackless gates this product is is a surface fixed solution purposely designed to overcome situations where it is impossible or impractical to excavate on existing slab such as in underground car parks, or sites where the slab depth is limited.
A standard profile base plate is ‘surface fixed’ to the road or car park using a minimal number of concrete anchors. The thickness of the base slab material for the gates to be fixed in place is minimum 250mm, so eliminating the need for foundation excavation.
With the increased threat around the world for vehicles being used as a weapon, this is the latest product on the market to provide on alternative solution for a crash rated bi-folding gate to offer high level security to underground car parks and buildings that otherwise would remain unprotected.
*DESIGN ASSESSMENT (ENGINEERED SOLUTION)
Included with this product will be a ‘Design Assessment’ report for the CSG 10630 model which would be bespoke to the client’s overall bi-folding gate requirements and will be site specific regardless in the world it is required.
This includes preparing and providing bespoke calculations for your hostile vehicle mitigation (HVM) measures based on the height, width and grade of substrate of the bi-folding gate required.
Our sales team can provide more information if you contact us via the general enquiries page below.
This product has been specifically designed and engineered based on the test results of our existing 40mph and 50mph Crash Rated Bi-Folding Gates.
Why a CSG 10630?
Specially designed for areas where a crash rated gate was previously thought impossible to install
Rack & pinion or chain drive
Any RAL colour
Operates at low & high weather extremes.
Hand built in the UK
Warranty, service and maintenance available.
Model CSG 10630 crash rated design assesment (3.5 Tonne) @ 48km/h (30mph).
Test Rating : PAS 68:2010
Vehicle Test Weight:
Vehicle Speed MPH:
Vehicle Speed KMH:
Drive: Hydraulic driving through a 270 degree system (European Patent No 1595050)
Hinges: 25mm dia stainless steel pins, DU self-lubricating plain bearings, and ball thrust bearings with stainless steel covers.
Leaf Folding: Rack and pinion system. Gate structure is manufactured from proprietary mild steel.
PLC based gate control system.
Locking: Hydraulically operated locking pin secures gate leaf.
Subject to site conditions it operates a 9 second unlock and open time, 11 second close and fully lock time and deliver a continuous operation – 100% duty cycle
Shot blast to SA 2.5.
Primed: Either galvanised or zinc primer @60μm.
Topcoat: Polyester top coat @60μm to a specific RAL No
Features and Benefits
This product is the solution when it’s impossible to excavate.
Suitable for underground or multi-story car parks.
Surface fixed for ease of installation.
Surface fixed for speed of installation.
Bespoke engineered solution report included, site specific.