Anti-Vandal Manual Gate – CSG 10405
The CSG 10405 Anti-Vandal Manual Gate has been specifically designed and developed as a secure access barrier where there is demand to prevent unauthorised access to parks, recreational areas, private land and roadways.
Standard commercially available steel gates are susceptible to vandalism and damage and are rarely capable of withstanding a determined attack. This is particularly so today with the availability of battery operated cutting tools and other portable equipment.
The CSG 10405 gate has been installed in a number of motorway locations where conventional gates have been routinely breached by the cutting away of steel sections, locking devices and other vulnerable elements resulting in numerous incidents including theft, trespass and frequently allowing livestock access to the carriageway.
Gate can be supplied any width to suit
Hinges are anti-lift and cannot be tampered with
All steel sections are heavy duty with all corners being internally reinforced to dissuade cutting
Posts are embedded in concrete and inserted deep into the ground with anti ‘pull out’ feature
Lock housing – designed to minimise unauthorised access and prevent cutting. Can be a bespoke solution to suit specific locking device
Padlock can be tethered within lock housing thus preventing lock from being accidentally removed – lock tether is retracted within post when padlock secured
Gate can be made ‘self closing’ if this is an important requirement
External latch easy to access and use
A hold open post can be provided and if required gate can be locked open
Gate is easily installed by fencing contractors, builders etc
Gate can be delivered to site and craned into position; pre-assembled and tested
This gate can be hot dipped galvanised and if required, painted to a specific RAL number
The CSG 10405 is easily secured using a Chubb C range padlock or similar. Cova Security Gates can provide a bespoke lock solution, if required including fireman access.
Why a CSG 10405?

Ideal for private roads, parks, farms, recreational areas and rural areas

Manual controls, anti-vandal and anti-tamper.

Manufactured to any entrance size

Operates at low & high weather extremes.

Hand built in the UK

Warranty, service and maintenance available.







Construction
All steel sections are heavy duty with all corners being internally reinforced to dissuade cutting and can be supplied any width to suit the location requirements.

Locking
The gate can easily be secured using a Chubb C range padlock or similar. Cova can provide a bespoke lock solution if required, including fireman access. Padlock can be tethered within lock housing thus preventing lock from being accidentally removed – lock tether is retracted within post when padlock secured. External latch is easy to access and use.

Finish
Polyester powder coated to a specific RAL No.
Galvanised or galvanised and polyester powder coated to a specific RAL No.

Features and Benefits
Hinges are anti-lift and cannot be tampered with.
Posts are embedded in concrete and inserted deep into the ground with anti ‘pull out’ feature.
Lock housing – designed to minimise unauthorised access and prevent cutting. Can be a bespoke solution to suit specific locking device.
Gate can be made ‘self closing’ if this is an important requirement.
A hold open post can be provided and if required gate can be locked.