Bi-Folding Overhead Tracked Gate Folding gates for large building entrances CSG 10601 

Bi-folding Ovehead Tracked Gate Folding gates for large building entrances CSG 10601 

Bi-Folding Overhead Tracked Gate Folding gates for large building entrances CSG 10601 

Bi-folding Ovehead Tracked Gate Folding gates for large building entrances CSG 10601 

Bi-Folding Overhead Tracked Gate Folding gates for large building entrances CSG 10601 

Bi-folding Ovehead Tracked Gate Folding gates for large building entrances CSG 10601 

Bi-Folding Tracked Gate – CSG 10601 

Designed and manufactured by Cova Security Gates in the UK, model 10601 is the first generation bi folding automated gate product and is the perfect solution where height and span of opening are critical factors. 
This is the largest gate in our portfolio, spanning up to 10m wide and 5m high. 
 
The CSG10601 Bi-Folding Gate consists of two posts, onto each post a bi-folding leaf is attached by hinges. The posts are connected by an overhead operator box which is cleated to and supported by an adjacent external structure, generally integral to a building. The bi-folding leaf utilises and overhead guide track within the underside of the operator box assembly, there is no requirement for ground guides or track. 
 
The post hung section of the bi-folding leaf is driven by a 3-phase/50Hz drive motor, output speed 33rpm driving through 18:95 ratio spur drive gear, locking in both the open and closed positions, leaf movement can be accommodated to open either inwards or outwards. Gate leaf sections are fully welded assemblies, constructed of RHS steel section, vertical infill bars at 100mm spacing as standard although additional/alternative materials can be accommodated to suit. 
 
Typically a gate will consist of a pair of bi folding leaves, capable of spans up to 10000mm W x 5000mm H clear aperture, single bi-folding leaf gates can be produced if required. Gate leaves can be operated by a single drive unit simultaneously, or individual drives for larger spans or where individual leaf control is required. Drive/s are located within the operator box and are controlled by a Programmable Logic Controller (PLC) located within the associated control cabinet. All gate systems come complete with a safety photocell system between the gate posts. 
 
Click on our time-lapse video (right) to see our team build and Factory Test one of our biggest Speed Gates to date! 
 
Model 10601 bi fold gate is ideally suited for special appearances and bespoke design and is frequently used by architects when specifying timber, glass and sheet steel requirements. 
Opening / closing speed 4 seconds – fully programmable for slower speeds 
Electro-mechanical continuously rated overhead drive and guide track system 
Can be surface fixed or sub surface 
Continuously rated high duty 
Incorporates a wide range of safety features including photocells, positive contact rubber edges light curtains and other devices to suit operating requirements 
Infill can be custom designed to suit any architectural brief 
Standard finish – powder coated in a RAL colour to suit 
Programmable Logic Controller with any type of operating controls to suit 
Can provide effective width of 10 metres and 5 metres height 
Bi-folding gate leaves can be individually controlled providing entry exit lane control. 

Why a CSG 10601? 

CSG 10601 security gate benefits tick icon
Highly secure. Manual or automatic controls 
CSG 10601 security gate benefits tick icon
Good for loading bay doors. Large or multi-storey car parks. A good alternative to where roller shutters may have been used. 
CSG 10601 security gate benefits tick icon
Available in any ral colour 
CSG 10601 security gate benefits tick icon
Operates at low & high weather extremes. 
CSG 10601 security gate benefits tick icon
Hand built in the UK 
CSG 10601 security gate benefits tick icon
Warranty, service and maintenance available. 
Subscribe me to your newsletter? 
Car park folding gate Car park gate installed Folding gate manufacture a CSG10601
Car park folding gate closed Car park gate view Folding gate closed with person walking nearby
Car park gate being manufactured Overhead tracked gate Closed large building gates
Check Icon

Construction 

Drive: Electro-mechanical continuously rated overhead drive and guide track system. 2No. 3-phase/50Hz drive motor, output speed 33rpm driving through 18:95 ratio spur drive gear. 
Hinges: 25mm dia stainless steel pins, DU self lubricating plain bearings and ball thrust bearings with stainless steel covers. 
Gate structure is fully welded RHS section. 
Height of gate - up to 5000mm. 
Width of opening up to 10000mm. 
Check Icon

Controls 

Controls are Programmable Logic Controller (PLC) based and therefore are very flexible and can be configured to suit customer’s requirements. 
Optional features can include conventional push button station. 
Single or multiple control positions and all forms of access control can be utilised. 
Check Icon

Finish 

Polyester powder coated to a specific RAL No. 
Galvanised or galvanised and polyester powder coated to a specific RAL No. 
Check Icon

Features and Benefits 

Leading edges of the leaves are fitted with electrical rubber safe edges, which if in contact with an obstruction will stop the operation of the gate. 
Available in widths up to 10000mm and heights up to 5000mm. 
Two installation options: surface fix, for existing surfaces usually within a building or where it is difficult to provide submerged foundations. Or subfix where it is possible to cast new foundations. 
Star Icon
'Very happy with Cova' 
Denis - Skanska JV 
Star Icon
'Cova's solution was the obvious choice' 
Gordon - Liberty Stadium, Swansea 
Star Icon
'A simple solution - highly recommended' 
David - Gatwick Airport 
Star icon
'Exceptional work carried out' 
Nick - High Commission, Islamabad 
CONTACT US 
Our site uses cookies. For more information, see our cookie policy. Accept cookies and close
Reject cookies Manage settings