Crash Tested Sliding Cantilevered Gate – CSG 10140

The CSG 10140 Crash Tested Sliding Cantilevered Gate is designed to provide a low cost crash tested sliding gate to prevent hostile vehicle mitigation / vehicle-borne terrorist or ram-raid threat.

The gate successfully passed the PAS 68:2010 test and achieved the following classification: Sliding Gate V/7500[N2]/64/90:2/0. Gate tested at 5m wide x 2.4m high.

Constructed from regular steel section, rather than large and unsightly heavy weight materials. This gate design can be aesthetically blended into the building or perimeter line, enabling hostile vehicle mitigation.

The standard material reduces production costs, offering an effective crash tested solution at a comparatively low cost when evaluated against other available products.

The CSG 10140 Sliding Cantilevered Gate requires a foundation depth of only 400mm, ideally suited to shallow and/or utility congested substructure.

The product is able to accept most architectural enhancement over and above its standard construction; therefore it lends itself to the continuation of any high security fencing specification, powered fence, or security toppings across the normally vulnerable vehicular entrance to the site.

This gate design can be aesthetically blended into the building or perimeter line, enabling hostile vehicle mitigation. The standard material reduces production costs, offering an effective crash tested solution at a comparatively low cost when evaluated against other available products.

Available in widths of 3000mm – 8000mm.

Crash Tested Sliding Gate

  • Constructed from standard steel section, this automated gate can be considered a low cost option.
  • Capable of blending seamlessly with any building or site perimeter line, enabling discreet vehicle mitigation for critical infrastructure and high security sites – supplied in a colour/finish to suit the client.
  • The CSG 10140 requires a minimal installation depth of 400mm, making it ideally suited to shallow and/or utility-congested substructure.
  • Effective gate width – now available up to a maximum of 8000mm following further testing of our patented arrestor system.
  • Height of gate – minimum 1800mm to maximum 2400mm – greater heights possible on application.

The product is able to accept any architectural enhancement over and above its standard construction format, lending itself to the continuation of any high security fencing specification, powered fence or security toppings across the normally vulnerable vehicular entrance/exit to site. A non-crash tested sliding cantilevered gate is also available.


Your Name*

Company

Your Email*

Tel No*

Site Address

Message

CRASH TESTED SLIDING CANTILEVERED GATE – CSG 10140 are designed and manufactured to the very highest standards and installed by our team of fully qualified engineers, whether installed in the UK or internationally.

Cova products are covered with a Cova Care minimum 12-month warranty.

We also offer a range of bespoke Cova Care plans for powered perimeter security products that are out of warranty or that have not been manufactured or installed by Cova Security Gates, subject to a site survey.

Our Cova Care plans are flexible and can be tailored to your specific needs and can be extended beyond the initial 12 months Cova care warranty.

Options include gold, silver or bronze care plans, which include 4 to 12-hour rapid responses, emergency 24 hours 7 day a week, 365 days a year call out service, right through to standard type maintenance agreements and service contracts.

Terms and conditions will apply to each bespoke Cova Care plan and our Cova Care Service Team would be pleased to advise you on (+44) 01293 553888

Crash Tested Sliding Cantilevered Gate Videos:

Crash Tested Sliding Cantilevered Gate Photographs: